S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
![background image](/volvo/s40_2.4i/l5-2.4l_vin_38_b5244s4/Page-1409005.png)
Note! Make sure that the O-ring is also removed.
Installation
Installing the pedal sensor
Note! For tightening torques, see Specifications. See: Specifications/Tightening Torque
Press in the new pedal sensor.
Note! Use new O-ring. The pedal sensor can only be installed in one position, i.e. with the guide pin pointing straight up.
Lubricate with soap solution and install the pressure sensor (1). Connect the connector (2).
Installing the protective covers