S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Slacken off the brake hose half a turn.
Remove:
-
the brake pads. See: Brake pads, front See: Brake Pad/Service and Repair/Brake Pads Front
-
the brake caliper.
Unscrew the caliper from the brake hose.
Note! Collect the brake fluid.
Installing the brake caliper
Note! For tightening torques, see Specifications. See: Specifications/Tightening Torque
Install:
-
the brake hose in the brake caliper. Do not tighten the hose fully yet
-
the brake pads. See: Brake pads, front See: Brake Pad/Service and Repair/Brake Pads Front.
Tighten the brake hose.
Tighten, see: Tightening torque See: Specifications/Tightening Torque.
Note! Ensure that the brake hose is not twisted. If the brake hose is twisted, there is a risk of circuit failure.
Finishing
Fill and bleed the brake system
Remove the pedal jack.
To bleed the brake system, see: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding.
Note! Use only Volvo Genuine parts brake fluid, Volvo DOT 4+.
Check:
The function of the brakes after bleeding. Check that there is no leakage
The brake fluid level.
Depress the brake pedal a few times.