S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Install:
-
the brake pipe in the brake hose (2). Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
the connector (1)
-
the brake pipe in the clips.
Bleeding brake systems
Remove the pedal jack.
Bleed the brake system. See: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding.
Check that the brake pipe connections are sealed.
Check the brake fluid level.
Installing the heat deflector plate
Applies to the left-hand side.
Install:
-
the heat deflector plate
-
the 5 plastic nuts.
Installing the air baffle