S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Note! Clean the brake tube terminals at the master cylinder and anti-lock brake system unit. Place paper under the master cylinder. This is to
protect the paintwork from damage if brake fluid is spilled.
Remove:
-
the two brake tubes (1) between the master cylinder and the control module
-
the two brake tubes (2).
Detach the two brake pipes (3) from the hydraulic modulator.
Note! Note the position of the brake tubes in the hydraulic modulator. Install plugs on the brake tubes and the master cylinder.
Removing the hydraulic modulator