S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Install:
-
the two brake pipes (3). Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
the two brake tubes (1) between the master cylinder and the control module
-
the two brake tubes (2).
Bleeding brake systems
Remove the pedal jack.
Bleed the brake system. See: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding. Check that the brake pipe
connections are sealed.
Check the brake fluid level.
Installing the protective covers