S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Install:
-
the starter motor
-
the screws for the starter motor. Tighten. See: Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque
-
the battery positive cable to the starter motor. Tighten the nut
-
the protective cover over the positive terminal on the starter motor
-
the flat pin contact to the starter motor solenoid
-
the bracket for the coolant hose. Tighten the nuts. Insert the coolant hose in the bracket.
Finishing
Installing the air cleaner (ACL) module
Install:
-
the air cleaner (ACL) module. See: Air filter module See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair.
-
the battery ground lead.
Final checks
Start the engine. Check for leakage. Check the engine function.