S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Detach the right and left-hand end faces of the bumper.
-
Grip the bumper from the inside and pull it forward in order to detach the two holders under the headlamps.
-
Remove the bumper, unplug the connectors for the fog lamps and place the bumper on a surface that does not damage the paintwork.
Note! Removal of the bumper is facilitated if carried out by two people.
Remove:
-
the nuts
-
the screw
-
the left-hand wing liner.
-
Remove the screws and the engine splash guard.
Installing the front engine block heater socket