S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Take a screw and toothed washer from the kit and tighten the ground cable in the front member.
-
Take a tie strap from the kit and clamp the cable excess.
-
Remove the panel from the right-hand end of the dashboard. Use a weatherstrip tool and carefully pry around the panel, so that the three clips on
the inside release.
Note! Do not damage the dashboard.
-
Remove the sill trim panel from the right-hand front door. First pull off the front edge of the sill trim panel so that the clip there releases. Then
continue backwards until the remaining clips on the underneath have released.
-
Unhook the sill trim panel from the B-pillar panel.
