Electric Engine Block Heater Installation for S40 24i L5-24L VIN 38 B5244S4 (2008)
-
Route the cable from the timer relay to the rubber grommet in the cowl panel.
-
Insert the cable through the rubber grommet and into the passenger compartment.
-
Insert all the cable excess into the passenger compartment.
-
If the car is equipped with a passenger compartment connector socket; take a tie strap from the kit and clamp the cable at the cable to the
passenger compartment connector socket.
-
Pull the cable from the rubber grommet in the cowl panel.
-
Reinstall the wing liner for the side member and bumper cover.
-
Reinstall the engine splash guard.
-
Remount the wheel and tighten the lug bolts to 90 Nm (66 lbf.ft.).
Part 2
Remote start, electric engine block heater (Continued)
Steps 26-50 apply to cars with 4-cylinder engines
-
Turn the seven clips 90°.