S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Remove the covers for the nozzles for the headlamp washers on the right and left-hand sides. Carefully grip the cover. Pull the cover out until the
catch becomes accessible.
Illustration B
-
Press the catch up. Remove the cover. Do not damage the painted surfaces or the washer nozzles.
-
Detach the ends of the bumper shell on the left and right-hand sides. Grasp the end of the bumper shell inside the fender liner. Carefully pull the
end of the bumper shell so that the two catches on the inside release.
-
Remove the bumper shell and air baffle. Pull the bumper shell and air baffle forward until the remaining catches under the lamps release.
-
Disconnect the connectors for the fog lamps if applicable.
Installing the front engine block heater socket
-
Assemble the front engine block heater socket using the parts from the kit, in accordance with illustrations A, B, C and D.
Illustration A