S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Reinstall:
-
the air baffle
-
the bumper. Make sure that the air baffle is positioned correctly in its mounting against the bumper. Press on so that the catches under the
headlamps attach.
-
the five clips and the screws in the top edge.
-
the connectors to the fog lamps.
Note! Installation of the bumper is facilitated if carried out by two people.
Part 2
Electrical engine block heater, 110V, 5 cyl 2WD (Continued)
Installing the front intake (C30)
Steps 40-46 only apply to the C30
-
Remove the left front wheel.
-
Remove the screws and the engine splash guard.