S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Pull out the fuel rail and injectors. Do not work them loose from side to side. Separate the fuel line quick-release connector. Press the two blue plastic
buttons. Lift out the fuel rail.
Removing the lower intake manifold
Remove:
-
the screws in the upper row for the intake manifold. Slacken off the screws in the lower row a few turns. Lift up the intake manifold. Detach the
hose between the oil trap and the intake manifold
-
the gasket. Discard the gasket.
Installation
NOTE: For tightening torques, see Specifications.
Installing the intake manifold and gasket
NOTE: Ensure that the gasket faces are clean.
Install:
-
a new gasket held in position by the lower screws for the intake manifold
-
the intake manifold
NOTE: Route the crankcase ventilation hose up between cylinders 2 and 3.
-
the hose between the oil trap and the intake manifold
-
the screws for the upper row.