S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Variable Valve Timing Actuator: Service and Repair
VVT unit
Special tools:
999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold
999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
999 5651 Extractor See: Tools and Equipment/999 5651 Extractor
999 5718 Drift See: Tools and Equipment/999 5718 Drift
999 7364 Drift See: Tools and Equipment/999 7364 Drift
999 7109 Wrench See: Tools and Equipment/999 7109 Wrench
999 7103 Lifting beam See: Tools and Equipment/999 7103 Lifting Beam
999 5185 HOOK See: Tools and Equipment/999 5185 Hook
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing components
Note! Crankshaft and camshafts must not be turned more than is stated in the method description. If the shafts are turned in any other way the
valves may be damaged.
Disconnect the battery negative lead. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Remove the air cleaner (ACL) module. See: Air filter module See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair.
Removal
Removing upper intake manifold
Caution! Seal the openings in the lower part of the intake manifold. Use tape or similar.
Remove: