S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Variable Valve Timing Solenoid: Removal and Replacement
VVT solenoid
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the variable valve timing solenoid
Remove:
-
the screws for the upper timing cover
-
the upper timing cover. Disconnect the connector for the variable valve timing solenoid
-
the screw for the variable valve timing solenoid
-
the variable valve timing solenoid by pulling it straight up.
Installing
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Tightening Torque
Replacing the gasket