S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Caution! Lift up the ignition coils, mark the position and the direction of the screw. move aside the ignition coils to one side.
Remove:
-
the upper belt cover. Disconnect the connector for the variable valve timing solenoid
-
the screws for the ignition coils
-
the 2 screws for the ground terminals
-
the spark plugs.
Installation
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Tightening Torque
Installing spark plugs
Install:
-
the spark plugs. Tighten. See: Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque
-
the ignition coils according to the earlier markings
-
the screws for the ignition coils and the ground terminals. Tighten. Connect the connector for the variable valve timing solenoid
-
the upper belt cover. Remove the seals on the lower part of the intake manifold.
Installing components