S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Exhaust Pipe/Service and Repair
Installing the muffler
Install:
-
the center exhaust pipe section
-
the M10 nut for the clamp between the front and center muffler. Do not tighten yet
-
the M10 nut for the clamp between the rear and center muffler. Do not tighten yet
-
the rubber mountings.
Adjust the position of the exhaust pipe. Tighten the two nuts.
