volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Receiver Dryer|Service and Repair|Page 11525 > < A/C - Air Flow Cycles From Floor To Defrost Vents/Noises|Page 11521
Page 1
background image

Receiver Dryer: Service and Repair

Accumulator

NOTE:  The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.

Preparatory work

Draining the air conditioning (A/C) system and removing components

WARNING:  Follow the safety instructions for work on air conditioning systems. See: Refrigerant, safety regulations.

Read the instructions for slow and fast leaks acc. to: AC-system, refilling.

CAUTION:  Always use new O-rings lubricated with compressor oil.

NOTE:  Plug the pipes and connections when working on the climate control system.

Drain the refrigerant from the air conditioning (A/C) system. See: Refrigerant, draining.

Remove:

-

right-hand front headlamp.

-

the bumper shell.

Remove:

-

the front edge of the right-hand fender liner

-

the plastic nut, x 1

-

the retaining clip against the engine cover under the vehicle.

Removal

Removing receiver

Remove the nut under the front fender liner on the righthand side. See the illustration.

NOTE:  Lubricate the thread using a little rustproofing agent so that the pressed in screw does not come loose.

Receiver Dryer|Service and Repair|Page 11525 > < A/C - Air Flow Cycles From Floor To Defrost Vents/Noises|Page 11521