S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Fuel Gauge Sender: Service and Repair
Fuel Pump and Level Sensor Unit
Fuel pump and level sensor unit
Note! Some variation may occur. However, the essential information in the illustrations is always correct.
Removing
Remove the fuel tank. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Removal and Replacement
Note! Ensure that the lever on the level sensor is not damaged when removing the pump.
Remove:
-
the large plastic nut, 1 pc. Use: 999 7111 Spanner See: Tools and Equipment/999 7111 Spanner
-
the pump.
Transfer of suction line (for vehicles equipped with auxiliary heater)
Remove the plug for the suction line from the underside of the level sensor, use a 9 mm socket.
Transfer the suction line to the new fuel pump.
Installing
Note! For tightening torques, see Specifications. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque