S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Headlamp Alignment Sensor: Service and Repair
Front Position Sensor, Headlamp
Front position sensor, headlamp
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparatory work
Ignition off
Ignition off.
Lifting points
This work requires that the vehicle be raised.
Turn the wheels fully to the right.
Remove the plastic nut securing the fender liner. Fold out the fender liner.
Removal
Removing the position sensor
Remove the position sensor from the bracket.
Remove:
-
the M6 screw (1)
-
the 2 screws (2)
-
the connector.
Installation
Installing the position sensor
Install: