S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Remove
-
the press tool 999 5765
-
the camshaft
-
the tappets.
Note! Carefully mark the tappets so that exact reinstallation can be carried out.
Repeat the procedure for measuring the valve clearance for all cylinders on both the intake and exhaust sides.
Installing tappets and camshafts
Note! For tightening torques not in the text, see Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque
Lubricate the valve guide wells.
Install all the tappets.
Lubricate the camshaft bearing seats and the upper sides of the tappets.
Position the intake camshaft. Ensure that the groove at the rear edge of the camshaft is above an imaginary center line.
Position the exhaust camshaft. Ensure that the groove at the rear edge of the camshaft is below an imaginary center line.