S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Caution! Make sure that the guides for the lower section are in the correct position.
Install:
-
new gaskets for the upper section of the intake manifold
-
the upper intake manifold. Tighten the screws alternately.
Tighten the intake manifold screws. See Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Tighten the hose clamp to the mass air flow (MAF) sensor. Connect the connector to the pressure sensor on the intake manifold. Install a new tie strap
for the cable harness.
Finishing
Checking function
Start the engine and check the function.