S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Program the function using VCT2000.
The fifty pin connector in the kit must be used to connect electrical accessories.
Control Module Relay Box Passenger Compartment
Control Module Relay Box Passenger Compartment
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparatory work
Disconnecting the battery negative lead
CAUTION: The driver information module (DIM) must not be replaced at the same time. This would erase the mileage.
NOTE:
-
Automatic alarms to the emergency services can be triggered if the vehicle is fitted with Volvo On Call.
-
Applies to 2005-. Check which mode global opening/closing is programmed in and make a note of it. See Vehicle communication, Programming
global opening/closing window.
Disconnect the battery negative lead.
Removal
Removing the passenger side soundproofing panel
Remove:
-
the 2 clips