S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
CAUTION: The pins on the wiper and turn signal lamp switch are fragile. Press the wiper/turn signal lamp switch into the connectors
carefully. Check that the pins engage correctly in the connectors.
Install:
-
wiper / washer switch with the screws, x 2. Tighten
-
the turn signal lamp switch with the screws, x 2. Tighten
-
the connectors, x2
-
the steering column covers.
Reset the contact roller acc. to: Angle sensor, steering wheel, resetting.
Install the steering wheel.
Finishing
Programming the contact reel/Steering wheel module (SWM)
Program the contact reel/steering wheel module (SWM). See:
S40 (04-)...................................................................................................................................................................................................................30667218
V50............................................................................................................................................................................................................................30667219
C70 (06-)...................................................................................................................................................................................................................30739646
C30............................................................................................................................................................................................................................30798175
