S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Impact Sensor: Service and Repair
Collision Sensor B- and C-Pillar
Collision sensor B- and C-pillar
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work (the same for both methods)
Disconnecting the battery lead
Ignition off.
Disconnect the battery negative cable. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Method content
This method consists of:
-
replacing
-
replacing.
Collision sensor B-post, replacing
Removing the collision sensor B-post
Remove:
-
the B-post panel. See: B-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Trim Panel
-
the connector.