S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Grasp the upper edge of the right-hand side cushion. Pull the side cushion forward so that the clip on the reverse releases.
-
Slide the side cushion up. Remove the side cushion.
-
Remove the screw.
-
Pull the panel upwards so that the four clips on the inside release. Remove the panel.
-
Fold out the anchorage eyelets. Take a scriber with angled tip and insert it in the hole at the upper edge of the cover (1). Turn the scriber so that
the tip grips the back of the cover. Pull the cover off.
-
Remove the screws from the anchorage eyelets.
-
Remove the screw (2).
-
Pull off the side panel at the top so that the two clips at the rear/bottom of the side window and the clip at the bottom of the D-pillar release.
-
Disconnect the connector for the 12V socket, if present.
-
Lift out the side panel.
