S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The front page gives the date of this edition and the edition it replaces
-
The second page shows the tools needed for the installation and the contents of the installation kit
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
-
Cut out the text page in order to follow the illustrations and text at the same time.
Alarm, movement sensor
Note! This accessory is connected to the car's electrical system. It requires software unique to the car.
-
Turn the ignition switch to position 0.
Note! Wait at least five minutes before disconnecting the connectors or removing other electrical equipment.
-
Carefully pry off the cover panel (1) from the headlining with a weatherstrip tool.
The pre-routed connector is attached to the inside of the cover panel.
-
Take the sensor with the green connection from the kit.