S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Backup Lamp Switch: Service and Repair
Back-up lamp switch, replacing
Removal
Removing the back-up lamp switch, gearbox M56 and M58
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
-
Ignition off
-
Remove the air cleaner (ACL) housing
-
Disconnect the connector
-
Clean around the back-up lamp switch.
-
Remove the back-up lamp switch.
Installation
Note! For tightening torques, see:
Installing back-up lamp switch, gearbox M56 and M58
Install the back-up lamp switch.
Installing the leads