S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Alternator Pulley: Service and Repair
Generator pulley, generator
Special tools:
999 5761 Socket See: Tools and Equipment/999 5761 Socket
999 7113 Spanner See: Tools and Equipment/999 7113 Spanner
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Disconnecting the battery lead
Disconnect the battery negative cable. See: See: Battery/Service and Repair/Procedures/Battery, Disconnecting
Removal
Removing pulley
Remove the generator (GEN). See: Generator See: Service and Repair.
Remove the belt pulley from the rotor shaft, use tool: 999 7113 Spanner See: Tools and Equipment/999 7113 Spanner and 999 5761 Socket See: Tools
and Equipment/999 5761 Socket as shown.
Installation
Installing pulley
Screw on the belt pulley and tighten it, use tool: 999 7113 Spanner See: Tools and Equipment/999 7113 Spanner and 999 5761 Socket See: Tools and
Equipment/999 5761 Socket. Tighten acc. to: Tightening torque See: Specifications.
Install the generator (GEN). See: Generator See: Service and Repair.