S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Caution! Install 2 cable ties as illustrated.
Install the soundproofing panel, 2 clips.
Install the battery negative cable. See: See: Battery/Service and Repair/Procedures/Battery, Disconnecting
Ordering software
Order software. See: See: Testing and Inspection/Programming and Relearning/Software Downloading
Finishing
Programming control module
Note! Applies to 2005-. Program the mode global opening/closing was programmed in. See Vehicle communication, Programming global
opening/closing window.
Reset the service indication message. Otherwise the lamp receives the incorrect reference. Global time is reset when replacing the Central Electronic
Module (CEM). Resetting of the service indication message is carried out according to resetting the service indication message.