S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Remove:
-
the 3 screws
-
the power steering pump.
Vehicles with old cable harness
Cut the leads to the larger connector. Install plastic tape around the cut leads.
Remove the fuse 15/31: F2 for the power steering pump.
Pull up the lead and cut it behind the cable terminal. Install plastic tape around the cut lead and press it down in the fuse holder.
Remove the ground lead for the power steering pump (slightly coarser 4 mm² lead) and cut off the cable terminal. Install plastic tape around the cut lead.