S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Disconnect the connectors, x 2.
Installation
Installing the contact reel/Steering wheel module (SWM)
Install the contact reel/Steering wheel module (SWM).
Note! Check carefully that the catch engages in the top of the contact reel / steering wheel module (SWM).
Install the upper mounting using the 2 x M5 screws. Tighten. See: Tightening torque See: Body and Frame/Specifications.
Caution! The pins on the wiper and turn signal lamp switch are fragile. Press the wiper/turn signal lamp switch into the connectors carefully.
Check that the pins engage correctly in the connectors.
Install:
-
wiper / washer switch with the screws, x 2. Tighten
-
the turn signal lamp switch with the screws, x 2. Tighten
-
the connectors, x2
-
the steering column covers. See: Panel steering column See: Steering Column/Steering Column Cover/Service and Repair.
Reset the contact roller acc. to: Angle sensor, steering wheel, resetting See: Sensors and Switches - Steering/Steering Angle Sensor/Adjustments.
Install the steering wheel. See: Steering wheel See: Steering Wheel/Service and Repair.
Finishing
Programming the contact reel/Steering wheel module (SWM)
Program the contact reel/steering wheel module (SWM). See: See: Testing and Inspection/Programming and Relearning