S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Control Arm Bushing: Service and Repair
Bushing Outer Control Arm Lower, Replace
Bushing outer control arm lower
Special tools:
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7140 Ring See: Tools and Equipment/999 7140 Ring
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparatory work
Removing the control arm
Remove the wheel.
Remove the link arm according to: Rear lower arm See: Service and Repair/Rear Suspension/Control Arm Lower, Replacing.
Removal
Removing the bushing
Install the control arm as illustrated.
Install the hydraulic cylinder as illustrated.
Use: 999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12 with: 999 7034 Connecting rod
M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400 , socket: 999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve ,
support: 999 7139 Support See: Tools and Equipment/999 7139 Support and drift: 999 7140 Ring See: Tools and Equipment/999 7140 Ring.
Pull the bushing out.
Note! The bushing is tapered and must be pulled down as shown.