S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Install the 3 clips.
Installing the clips for the brake cable
Install:
-
the 1 clip
-
the screw.
Installing the upper control arm and the tie rod
Install the 2 screws. Do not tighten yet.
Note: The rear suspension must be in the normal position when tightening all the joints in the rear suspension where rubber bushings are involved.
See: Normal position.
Tighten the screws. For tightening torques, See: Specifications.
Installing the lower control arm
Install: