S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Seals and Gaskets: Service and Repair
Selector Shaft Seal
Selector Shaft Seal
Preparatory work
Removing left engine pad
Remove the left engine pad. See: Engine support insulator left See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and
Accessories/Engine Mount/Service and Repair/Engine Support Insulator Left.
Removal
Removing the bracket
Remove:
-
the 3 screws
-
the bracket.
Removing the gear shift lever
Detach the shift cable from the arm using 999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar.
Press out the spring pin with 999 7221 Press tool See: Tools and Equipment/999 7221 Press Tool. Use the long pressure pin.
Remove the lever.
Removing the seal