S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Note! Ensure that the arrows are opposite each other.
Note! Shift the gear selector lever to neutral.
Install:
-
the control module. Do not damage the terminal pins
-
the 3 x M8 screws
-
the bracket
-
the M8 screw for the bracket
-
the 2 connectors
-
the lever, 1 nut. Tighten. See: Tightening torque See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications/Tightening
Torque.
-
the battery negative cable.
Installing the air cleaner (ACL) module
Install the air cleaner (ACL) module. See: Air filter module See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair.
Finishing
Ordering software
Order software according to: See: Testing and Inspection/Programming and Relearning/Software Downloading
Checking the diagnostic trouble codes (DTCs)
Check that no diagnostic trouble codes have been stored during the repair.