S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Carefully pry all the way around the door handle panel and door module so that the six clips release and the trim panel releases from the door
panel.
Illustration B
-
Pull up the panel and door module. Disconnect the connector on the underneath.
Removing the door module
-
Remove the four screws holding the door module at the panel
-
Remove the door module.
Installing a new trim panel
-
Take the new panel from the kit and tighten the door module to it
-
Connect the connector to the door module
-
Press the new panel and door module into place. Ensure that the catches engage
-
Reinstall the small internal panel.
-
Repeat points 2-5 on all doors.