S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Secure the long end of the wire in the upper winch. Raise about 20 cm.
Check that the loose end of the wire is not slipping.
Secure the other end of the wire in the lower winch.
Use the upper winch to wind in the wire as much as possible.
Winch in the wire using the lower winch until the wire reaches the locating pin (2).
Protect the interior trim using the parabolic chisel when the wire is fed in.
Bend out the window. Cut away the window using a snap-blade universal knife.
Installation
Installing rear side windows
Install:
-
the side window. See Bonded window general, information See: Service and Repair/Removal and Replacement
-
all wiring.