volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Subframe|Service and Repair|Page 22988 > < Rear Subframe|Service and Repair|Page 22986
Page 7
background image

Note! Ensure that no cables/hoses are trapped when lowering the sub-frame.

Use a post-lift with lifting table. Position the lifting table against the sub-frame.

Note! Make sure that the lifting table is centered under the subframe for optimal weight distribution. Check that the lifting table is correctly
applied against the subframe.

Remove:

-

the screw, 1 pc. (1), on both sides

-

the screws, 2 pcs. (2), on both sides.

Lower the sub-frame approximately 5 cm.

Removing the leak diagnostic pump

Rear Subframe|Service and Repair|Page 22988 > < Rear Subframe|Service and Repair|Page 22986