volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Wheel Sensor Front, Replacing|Page 12235 > < Wheel Sensor Front, Replacing
Page 2
background image

-

the wheel sensor

-

the M5 screw. Tighten.

-

the connector.

Thoroughly check that the wheel sensor cable is routed as illustrated.

Finishing

Install the wheel.

Function test

Read off any diagnostic trouble codes (DTCs) stored in the control module.
Erase.
Interrupt the diagnostic function by turning off the ignition.
Test drive the car.
Check that no diagnostic trouble codes (DTCs) are stored. Interrupt the diagnostic function by turning off the ignition.

Wheel Sensor Front, Replacing|Page 12235 > < Wheel Sensor Front, Replacing