S40 T5 L5-2.5L Turbo VIN 68 B5254T3 (2006)
-
the 3 nuts
-
the accelerator pedal (AP).
Removing the stop lamp sensor
Press in the push rod (1) and turn the sensor clockwise. Remove the sensor.
Installation
Installing the accelerator pedal (AP)
Install:
-
the accelerator pedal (AP)
-
the 3 M6 nuts.
Installing the brake pedal
Install:
-
the brake pedal together with the accelerator pedal (AP)
-
the 5 M8 nuts (3)
-
the 1 M8 screw (4)
-
the pin for the power brake booster
-
the connector (1)
-
the connector (2)
-
new tie straps for the cable harness.
Installing the stop lamp sensor