S40 T5 L5-2.5L Turbo VIN 68 B5254T3 (2006)
-
1 M6 nut
-
the position sensor
-
screws bracket, 2 pcs.
-
the connector
Installation
Note! For tightening torques, see Tightening torque. See: Specifications/Mechanical Specifications/Starting and Charging
Installing position sensor
Install:
-
the connector
-
screws bracket, 2 pcs.
-
the position sensor
-
the nut, M6 x1.
Finishing
Calibration of position sensor
Lower the vehicle.
When replacing the position sensor the new position sensor must be calibrated. Carry out calibration according to VIDA vehicle communication.