volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Subframe|Service and Repair|Page 16723 > < Sub-Frame Front, Replacing|Page 16719
Page 1
background image

Rear Subframe: Service and Repair

Rear subframe

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparatory work

Remove the rear springs on both sides.  See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension

Remove the rear anti-roll bar.  See: Stabilizer Bar/Service and Repair/Rear

Removal

Removing the wheel sensor rear right-hand side

Note! Blow clean thoroughly around the sensor with compressed air before removing it.

Remove the sensor mounting screw and allow to hang in place.

Removing the brake caliper

Rear Subframe|Service and Repair|Page 16723 > < Sub-Frame Front, Replacing|Page 16719