volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Glass Mounted Antenna, GSM 900 MHz|Page 14529 > < Glass Mounted Antenna, GSM 900 MHz|Page 14527
Page 4
background image

Templates are provided to facilitate installation of the internal base module. The templates are necessary because the black shading on the windscreen
may conceal the external base module.

-

Cut out the two templates provided with the illustrations

-

Align one template on the installed external base module. Secure it using tape

-

Carefully clean the interior surface of the glass. Use the cleaning cloth supplied. Wipe dry using a rag

-

Install the second template on the interior, edge to edge with the external template.

The internal and external base modules must be positioned directly opposite each other.

-

Remove the backing from the internal base module. Install the internal base module in the cut-out on the second template. Install the internal base
module in the same way as the external base module. Press hard for 20 seconds

-

Remove the templates.

Routing the antenna cable

The clips in the kit are used to secure the antenna cable, to the windscreen frame for example.

Warning! Do not secure the antenna cable to the inflatable curtains.

Illustration A does not apply to the S40, V40, S60, V70 (00-) or S80

-

Windscreen. Route the cable via the A post and on under the dashboard to the telephone.

Illustration B does not apply to the S40, S60 or S80

Glass Mounted Antenna, GSM 900 MHz|Page 14529 > < Glass Mounted Antenna, GSM 900 MHz|Page 14527