S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove the backing from the external base module. Secure the external base module on the windscreen. Press hard on points 1, 2, 3, 4 and 5, in
order, for 3-4 seconds.
-
Ensure that the tape is sealed around the external base module.
Installing the internal base module
Templates are provided to facilitate installation of the internal base module. The templates are necessary because the black shading on the windscreen
may conceal the external base module.
-
Cut out the two templates provided with the illustrations.
-
Align one template on the installed external base module. Secure it using tape.
-
Carefully clean the interior surface of the glass. Use the cleaning cloth supplied. Wipe dry using a rag.
-
Install the second template on the interior, edge to edge with the external template.
The internal and external base modules must be positioned directly opposite each other.
-
Install the internal module in the cut-out of the second template. Install the internal module base in the same way as the external module base.
-
Remove the templates.
Routing the antenna cable
The clips in the kit are used to secure the antenna cable, to the windscreen frame for example.
Warning! Do not secure the antenna cable to the inflatable curtains.
Illustration A does not apply to the S40, V40, S60, V70 (00-) or S80
