volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bluetooth, Swan Neck Microphone|Page 14686 > < Bluetooth, Swan Neck Microphone|Page 14684
Page 3
background image

-

Slide the driver's seat fully forwards and then fully upwards from the rear edge.

-

Turn the ignition switch to position 0.

-

Disconnect the battery negative lead.

Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.

-

Turn the ignition key to position II.

-

Move the gear selector lever to its rearmost position.

-

Use a weatherstrip and pry off the gear selector panel at the rear edge.

Bluetooth, Swan Neck Microphone|Page 14686 > < Bluetooth, Swan Neck Microphone|Page 14684