S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Route the cable in front of the tube (1).
-
Secure the cable with a cable tie to the large connector (2).
-
Reinstall the upholstery for the backrest.
-
Lay the cable in the carpet joint. Route the cable forward and across in the tunnel console.
Note! It is important that the cable has the right length so that the seat can move back and forth freely.
-
Pull out the cable from the tunnel console. Find the foam tape with connections for the Bluetooth system, located behind the tunnel console. Open
the foam tape.
