S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Wash any dirt and stones off the bumper casing. Use a mild soap solution
-
Clean around the drilled holes. Use a cleaning pad (P/N 9192678). Allow to dry
-
Apply primer (P/N 9192679) around the holes. Allow to dry.
NOTE: It is important that primer is used otherwise the sensor holders will not mount securely in the bumper cover.
-
Clean the mating surface on the sensor holders. Use cleaning pad (P/N 9192678). Allow to dry
-
Apply the primer (P/N 9192679) on the cleaned surfaces of the sensor holder. Allow to dry.