volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Auxiliary Input / Output Jack, Entertainment System|Part 1|Page 15030 > < Auxiliary Input / Output Jack, Entertainment System|Part 1|Page 15028
Page 6
background image

Applies to cars with RTI (road traffic information)

-

Remove the two screws (1) in the DVD drive bracket and remove the bracket with DVD drive.

Applies to cars with RTI (road traffic information)

-

Position the two red/white (R/W) wires back along the cable. Insulate and fasten them at the cable using foam tape from the kit. They must not
come into contact with the chassis. The two green connectors should be loose.

Applies to cars with RTI (road traffic information)

Connection to the DVD unit

-

Unplug the DVD power supply connector (1).

-

Plug in the connector of the iPod adapter power supply into the DVD unit (2).

-

Plug in the connector unplugged from the DVD unit into the other connector of the iPod adapter (3).

-

Connect the Melbus cable (4), P/N 8633596, to the DVD unit.

-

Reposition the bracket with DVD drive and fasten it with the three screws.

-

Clamp in the cable at existing cable harnesses using tie straps from the kit. Make sure that the cable does not chafe against sharp edges.

Auxiliary Input / Output Jack, Entertainment System|Part 1|Page 15030 > < Auxiliary Input / Output Jack, Entertainment System|Part 1|Page 15028