volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Power Amplifier, Replacing|Page 15319 > < Power Amplifier, Replacing|Page 15317
Page 3
background image

Warning! The ignition must be in position "0" and the key removed from the ignition switch if any connector in the SRS system is to be
unplugged. Then wait at least three minutes and disconnect the battery negative lead before unplugging any of the connectors. When work is
completed, the ignition key must be turned to position "II" before reconnecting the battery negative lead.

Amplifier

Note! This accessory requires software unique to the car.

Note!

-

Steps 2-5 and 18 only apply to the S60, V70 and XC70.

-

Steps 6-9 and 19-20 only apply to the S80.

Preparations

Power Amplifier, Replacing|Page 15319 > < Power Amplifier, Replacing|Page 15317