S60 L5-2.4L VIN 64 B5244S6 (2003)
Applies if the radio is already installed
-
Disconnect the connectors (1) from the connectors (2) in the existing T-cable (3) from the radio
-
Place the T-cable to one side. The T-cable will not be reused
-
Connect the new cable harness and T-cable at the same location as the old ones.
Applies to all models:
-
Reinstall the radio tray
-
Connect all wiring to the radio
-
Connect the aerial adapter.
Reinstall:
-
the radio
-
the dashboard environmental panel
-
the panel around the gear selector lever
-
the panel in front of the gear selector lever (S60 and V70).
-
Turn the ignition key to position II
-
Reconnect the battery negative lead
-
Program the software. See the service information in VIDA
-
Program the radio code.
